The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards. Post Dimensions (inches) T-posts to 3" O.D. pipe Impact Force 2,000 lbs. per stroke Impact Energy 40 ft.-lbs. per stroke Hammer Weight 10 lbs. Strokes per Second 6 Mounts T3 Driver Skid-Steer Skid-Steer Offset Euro/Global Mini-Skid John Deere 200-500 Series Overall Depth (inches) 12" 14" 18" 16" 17.63" 15" Overall Width (inches) 11" 45.5" Extendable 50.5" - 86.5" 45" 37" 49" Overall Height (inches) 17" 19" 19" 21" 24.5" 24" Weight 86 lb. 173 lb. 286 lb. 181 lbs. 55 lbs. 193 lb. Hydraulic Requirements 1,500 - 3,000 PSI & Up to 30 GPM* * T3 Driver will operate at 6 strikes per second on vehicles with 15-30 GPM. It will function at fewer strikes per second below 15 GPM.
The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards. Post Dimensions (inches) T-posts to 3" O.D. pipe Impact Force 2,000 lbs. per stroke Impact Energy 40 ft.-lbs. per stroke Hammer Weight 10 lbs. Strokes per Second 6 Mounts T3 Driver Skid-Steer Skid-Steer Offset Euro/Global Mini-Skid John Deere 200-500 Series Overall Depth (inches) 12" 14" 18" 16" 17.63" 15" Overall Width (inches) 11" 45.5" Extendable 50.5" - 86.5" 45" 37" 49" Overall Height (inches) 17" 19" 19" 21" 24.5" 24" Weight 86 lb. 173 lb. 286 lb. 181 lbs. 55 lbs. 193 lb. Hydraulic Requirements 1,500 - 3,000 PSI & Up to 30 GPM* * T3 Driver will operate at 6 strikes per second on vehicles with 15-30 GPM. It will function at fewer strikes per second below 15 GPM.
Image 1 of 1